SET UP
HOW TO SET UP YOUR V2
If you are wondering how to set up a new refill pack, follow instructions 3 to 11.
Unscrew reservoir from glass jar and remove cartridge from reservoir. Wash each component of the jug
Remove the refill box from the original jug box.
Take out one refill bag and one carbon felt bag from the pack.
Take out the carbon felt disk and insert into the lid as shown.
Open up your refill pack and pour into the cartridge.
Fit the lid securely on to
the cartridge.
Half fill the glass jar with fresh cold water and soak cartridge for 6 minutes.
Twist the cartridge into the reservoir and fill up. Allow 2 full reservoirs to filter before consuming water.
Wash out the glass jar, as it may have deposits from step 8.
When putting your jug back together, make sure you put the black gasket back onto the jar to create a water tight seal.
You are now ready to use your V2!
WHAT TO DO if your cartridge gets blocked
Don't worry if your cartridge gets blocked. All you need to do is remove the cartridge from the reservoir, and run the tap onto the bottom of the cartridge. This is due to some of the media getting stuck in the grid.
HOW TO TREAT YOUR V2
STILL STRUGGLING? CONTACT US
service@phoxwater.com